Workshop exterior

All products

Here is a list of all products listed on our website.

Super thin penetrating formula, works great on most materials, especially balsa and other soft woods.  Excellent “wicking action”, can be used to strengthen fibreglass cloth.  Bonds in 1 to 5 seconds.

A premium two part epoxy ideal for the fast build and repairs in both the workshop and in the field. This epoxy is vibration resistant and fuel proof and well not get brittle with age. We do not recommend this epoxy for major load bearing joints or where much greater strength is required, here we … Continue reading 5 Minute Z-POXY

A premium two part epoxy for high strength applications. e.g. engine mounts, fire walls, bulkheads and anywhere where there is a high load. This epoxy is not effected by fuel and will not become brittle over age. The 30 minute cure time give you all the time you need to ensure all the items are … Continue reading 30 minute Z-POXY

Fitments for Futaba / Savox / JR / Hitec.

Fitments for Futaba / Savox / JR / Hitec.

Fitments for Futaba / Savox / JR / Hitec.

Fitment ONLY for Futaba / Savox.

Fills gaps and works well on harder woods such as spruce, even works on oily surfaces. Allow 7 to 10 seconds for positioning. Cures in 24 hours, the cure can be accelerated with ZIP Kicker.

Accelerates super glue cure times, sets in just a few seconds. Available in 2 oz with pump dispenser and 8 oz refill bottle.

Z-ENDS extender tip to allow drops of glue to be placed in hard to access areas, plus a 12″ length of micro dropper tubing.

This is a true odourless CA, it has the same filling properties as ZAP A GAP CA+ but without the fumes. Works on balsa, plywood, bass wood and most other modelling materials. It is a medium thickness that cure in 15 seconds.

The worlds best canopy glue, 560 dries clear and make it idea for attaching canopies and pre formed ABS parts. The glue has excellent shock resistant bonds and will stay put even at high vibration and speed. The glue is non toxic and water-based.

Accelerator for Zap O and other Foam CA’s. Non fuming formula.

Large and small sets.

Sopwith pup type, 8 horns per set.

Two size to suit both Silicone and Tygon tube. Packaged in 5′s.

Replace the arms on your walbro carbs with a servo arm that works in partnership with your servo movement.

High quality ceramic, sintered and felt clunks.

Trike set of oleos to suit Xcalibur available with brake fitting or without. These are the latest trailing link units designed for the Ripmax Xcalibur. They have a 20 mm offset and measure 110 mm from the axle to the top, they have a 6 mm mounting or with the adapter shown fitted will fit … Continue reading Ripmax Xcalibur Retract Set

Tank set for the Willis Warbirds Jet Provost kit.  This is for a set of three epoxy glass tanks including fittings.

Jet Provost retract sets for the Willis Warbirds kit. Specifications Individual items Sets Brake & wheel Sets

We can supply a jet pipe suitable for the Willis Warbirds Jet Provost kit.

Price £120.00

To suit 6 mm OD pipe in packets of 10

Price £4.50

To suit 5 mm OD pipe in packets of 10

Price £4.50

To suit 4 mm OD pipe in packets of 10

Packets of 5 strips (each strip contains 10 clips)

Available in 6 mm, 8 mm and 1/4″ diameters. Lengths are 40 mm and 80 mm.

Available in various colours.

Available in 100 mm and 130 mm lengths.

Protect your expensive models from the dreaded hanger rash with our of the shelf 30 cc up to 100 cc wing bags. We can also make covers for your rudder and tail stabiliser as well. Please call us for quotes on custom wing bags.

Price £ (please call)

Protect your expensive jet model from the dreaded hanger rash with this custom made wing and fuselage bag set.

Price £ (please call)

Protect your expensive jet model from the dreaded hanger rash with this custom made wing and fuselage bag set.

Price £ (please call)

Retract air tanks in various sizes.

Air line fittings Xicoy electronic retract valve air up & down with 1/16″ barbs.

Various sizes of ball races retract wheels.

Various sized plain bearing ESM retract wheels.

Servo extension leads, 22 swg. Lengths from 15cm to 100cm.

This clevis will screw onto a 3 mm thread.

Various sized linkage ball joints with and without standoffs.  These  fit a 3 mm thread with 3 mm or 2mm hole diameters. Sold in packets of ? ball joints.

Multiplex MPX 6 pin connectors, enable neat installations and quick connection/disconnection of two servos in one plug or other wiring purposes.

MPX mounting plates in GRP

This is a MPX holder plate in nylon.

Retract control valve for air up & down in 5 and 3 nipple versions with 1/16″ barbs, for use with a servo to control the valve.

Bulkhead mounting pressure gauge upto 150 PSI / 1 MPa. 1/16″ barb fitting.

Various nylon air line connectors, priced as indicated.

Various high quality metal air line fittings with 1/16″ barb, prices as indicated.

Ensure your servo leads never become disconnected with this simple device which is quick and easy to install.  Ideal for connecting extension cables or when connecting your wing servos on larger models.

Available in various colours.

Fuel pipe polyurethane 3 mm to 6 mm outer dimensions.

Price from £ TBC per meter

Fuel tank fitting bung assembly to epoxy into fuel tank with screw fitting center.

Fuel tank bung assembly screw fit.

Fuel tank fitting 90° elbow, 5mm thread for 4mm internal diameter pipe.

Fuel tank nipple fitting, 5 mm thread with a 4 mm barb.

Offset door hinges in nylon.

Various 2 mm to 3 mm control horns CNC cut from GRP.

Air line fittings fill valve 1/16″ barb bulkhead mounting.

Air line fittings nipple 3 mm and 5 mm thread to 1/16″ barb straight.

Air line fittings 90° nipple in 3 mm and 5 mm thread to 1/16″ barb.

Top Flight Giant Scale Zero Retracts 85°

BV141 retract units and oleos for 5″ wheels.

We stock a wide range of retract units, please contact us for further details. You can see our Premier UK Retracts for more details.

We stock a wide range of retract oleos, please contact us for further details. You can see our Premier UK Retracts for more details.

We occasionally have some second hand goodies to sell.

We sometimes have stock we need to clear.

We sometime sell on new and old kits and unfinished projects.

Watch this space, new products are being added all the time.

The PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units … Continue reading PowerBox Pioneer

Please contact us to make a purchase.

Model Aviation Building Specialists